An independent exam-prep resource.
Independent exam-prep resource · Covers all 50 states
Water operator installing a gate valve on a distribution main

Ohio · Water Distribution · Class II

Ohio Grade 2 Water Distribution Operator Exam

The Ohio Grade 2 water distribution certification is designated Class II and issued by Ohio Environmental Protection Agency (Ohio EPA). Intermediate certification for operators running day-to-day operations at small to mid-size systems.

Photo: Rainier5, CC BY-SA 3.0

Applied math is a significant part of the Ohio Class II exam.

Practicing calculations like dosage, detention time, and loading before test day is one of the most effective ways to prepare, alongside reviewing your state’s official exam content outline.

Exam facts

Exam facts
Grade levelClass II
Questions100
Time limit150 minutes
Passing score70%
DifficultyIntermediate
Exam administered byAssociation of Boards of Certification (ABC), administered for Ohio EPA

Prerequisites for Class II

  • Grade 1 certification (in most states)
  • 1–2 years of operating experience

Confirm exact requirements with Ohio Environmental Protection Agency (Ohio EPA).

What's on the exam

  • Distribution system hydraulics
  • Storage facilities and tanks
  • Pumps and motors
  • Cross-connection control and backflow
  • Water main installation and repair
  • Disinfection of mains and storage
  • Process control adjustments
  • Applied treatment math

The math on the Water Distribution exam

These calculations are commonly included in water distribution operator exam preparation and may appear on your exam depending on your certification level and state. Practicing them is one of the most effective ways to prepare.

  • Pressure and head (psi to feet)
  • Pipe volume and flushing
  • Chlorine dosage for main disinfection
  • Flow rate and velocity
  • Storage detention time
  • Pump horsepower and efficiency

Free Class II practice questions

Sample questions with full explanations at this level.

Take the practice quiz →

Frequently asked questions

What is the Ohio Grade 2 water distribution certification called?
In Ohio, the Grade 2 water distribution certification is designated Class II, issued by Ohio Environmental Protection Agency (Ohio EPA).
How many questions are on the exam and what score do I need?
The exam has about 100 questions with a 150-minute time limit, and you need 70% to pass. It is administered by Association of Boards of Certification (ABC), administered for Ohio EPA.
What are the prerequisites for Class II in Ohio?
Typical prerequisites: Grade 1 certification (in most states); 1–2 years of operating experience. Exact requirements are set by Ohio Environmental Protection Agency (Ohio EPA).