Texas · Water Treatment · Class C
Texas Grade 2 Water Treatment Operator Exam
The Texas Grade 2 water treatment certification is designated Class C and issued by Texas Commission on Environmental Quality (TCEQ). Intermediate certification for operators running day-to-day operations at small to mid-size systems.
Applied math is a significant part of the Texas Class C exam.
Practicing calculations like dosage, detention time, and loading before test day is one of the most effective ways to prepare, alongside reviewing your state’s official exam content outline.
Exam facts
| Grade level | Class C |
|---|---|
| Questions | 100 |
| Time limit | 150 minutes |
| Passing score | 70% |
| Difficulty | Intermediate |
| Exam administered by | TCEQ (administered at approved testing centers) |
Prerequisites for Class C
- Grade 1 certification (in most states)
- 1–2 years of operating experience
Confirm exact requirements with Texas Commission on Environmental Quality (TCEQ).
What's on the exam
- Coagulation and flocculation
- Sedimentation and clarification
- Filtration (conventional, direct, membrane)
- Disinfection and disinfection byproducts
- Corrosion control and stabilization
- Source water and watershed protection
- Process control adjustments
- Applied treatment math
The math on the Water Treatment exam
These calculations are commonly included in water treatment operator exam preparation and may appear on your exam depending on your certification level and state. Practicing them is one of the most effective ways to prepare.
- Chemical dosage (mg/L to lbs/day)
- Chlorine demand and CT calculations
- Detention time
- Filter loading and backwash rate
- Flow rate and velocity
- Percent strength of solutions
Free Class C practice questions
Sample questions with full explanations at this level.
Take the practice quiz →Frequently asked questions
- What is the Texas Grade 2 water treatment certification called?
- In Texas, the Grade 2 water treatment certification is designated Class C, issued by Texas Commission on Environmental Quality (TCEQ).
- How many questions are on the exam and what score do I need?
- The exam has about 100 questions with a 150-minute time limit, and you need 70% to pass. It is administered by TCEQ (administered at approved testing centers).
- What are the prerequisites for Class C in Texas?
- Typical prerequisites: Grade 1 certification (in most states); 1–2 years of operating experience. Exact requirements are set by Texas Commission on Environmental Quality (TCEQ).