Water Treatment · Entry
Grade 1 Water Treatment Operator Exam
Entry-level certification for operators at small systems or working under direct supervision.
Applied math is a significant part of the Grade 1 water treatment exam.
Practicing calculations like dosage, detention time, and loading before test day is one of the most effective ways to prepare, alongside reviewing your state’s official exam content outline.
Exam facts
Grade/class terminology and exact requirements vary by state. The figures below are national baselines; find your state’s own grade names and rules on its certification page.
| Grade level | Grade 1 |
|---|---|
| Questions | 100 |
| Time limit | 120 minutes |
| Passing score | 70% |
| Difficulty | Entry |
Prerequisites
- High school diploma or GED
- 0–1 year of operating experience (varies by state)
Requirements vary by state — check your state page for exact rules.
What's on the exam
- Coagulation and flocculation
- Sedimentation and clarification
- Filtration (conventional, direct, membrane)
- Disinfection and disinfection byproducts
- Corrosion control and stabilization
- Source water and watershed protection
- Basic operations and monitoring
- Recordkeeping and reporting
The math on the Water Treatment exam
These calculations are commonly included in water treatment operator exam preparation and may appear on your exam depending on your certification level and state. Practicing them is one of the most effective ways to prepare.
- Chemical dosage (mg/L to lbs/day)
- Chlorine demand and CT calculations
- Detention time
- Filter loading and backwash rate
- Flow rate and velocity
- Percent strength of solutions
Free Grade 1 practice questions
Try a few sample questions with full explanations.
Take the practice quiz →