Pennsylvania · Water Treatment · Class C
Pennsylvania Grade 3 Water Treatment Operator Exam
The Pennsylvania Grade 3 water treatment certification is designated Class C and issued by Pennsylvania Department of Environmental Protection (PA DEP). Advanced certification for shift leads and operators at larger systems with complex processes.
Applied math is a significant part of the Pennsylvania Class C exam.
Practicing calculations like dosage, detention time, and loading before test day is one of the most effective ways to prepare, alongside reviewing your state’s official exam content outline.
Exam facts
| Grade level | Class C |
|---|---|
| Questions | 120 |
| Time limit | 180 minutes |
| Passing score | 70% |
| Difficulty | Advanced |
| Exam administered by | Association of Boards of Certification (ABC) |
Prerequisites for Class C
- Grade 2 certification
- 3–4 years of operating experience
- Some post-secondary coursework (varies by state)
Confirm exact requirements with Pennsylvania Department of Environmental Protection (PA DEP).
What's on the exam
- Coagulation and flocculation
- Sedimentation and clarification
- Filtration (conventional, direct, membrane)
- Disinfection and disinfection byproducts
- Corrosion control and stabilization
- Source water and watershed protection
- Advanced process optimization
- Regulatory compliance strategy
The math on the Water Treatment exam
These calculations are commonly included in water treatment operator exam preparation and may appear on your exam depending on your certification level and state. Practicing them is one of the most effective ways to prepare.
- Chemical dosage (mg/L to lbs/day)
- Chlorine demand and CT calculations
- Detention time
- Filter loading and backwash rate
- Flow rate and velocity
- Percent strength of solutions
Free Class C practice questions
Sample questions with full explanations at this level.
Take the practice quiz →Frequently asked questions
- What is the Pennsylvania Grade 3 water treatment certification called?
- In Pennsylvania, the Grade 3 water treatment certification is designated Class C, issued by Pennsylvania Department of Environmental Protection (PA DEP).
- How many questions are on the exam and what score do I need?
- The exam has about 120 questions with a 180-minute time limit, and you need 70% to pass. It is administered by Association of Boards of Certification (ABC).
- What are the prerequisites for Class C in Pennsylvania?
- Typical prerequisites: Grade 2 certification; 3–4 years of operating experience; Some post-secondary coursework (varies by state). Exact requirements are set by Pennsylvania Department of Environmental Protection (PA DEP).